1. Check if the Internet connection is good or not

The first rule of any IT issue is turning it off and then switching it on again after some time. Most of the problems are fixed by this step. If the problem persists, follow the other ways mentioned in this article. People might end up feeling that this step is a bit stupid but trust me it works. Most of the time when people face this issue is when the router is not connected to the Internet. If you have any other device connected to the WiFi make sure you check if they can access the internet. There have been times when people have accidentally cut the broadband cable. Make sure to check the internet properly because most of the time when there is a connection issue it is because of the router.

2. Date and Time settings

This is one of the settings which might look very stupid but surely creates a lot of problems. Most of the latest Android phones which are available in the market come with automatic date settings which are fed from the network operator. If for some reason users have made the settings manual then they have to go and change it to automatic. Generally, when users reset or update their phone this kind of issue occurs. 

Users will have to simply change their date and time settings to automatic and to do that they will have to open their ‘Clock’ application. Click on the three dots which are available in the top right-hand corner of the screen and simply click on Settings.

From settings users will have to choose the option ‘Change date and time’ on the android device.

Switch on the automatic date and time feature and simply restart your mobile phone and users will be good to go.

3. Check Router network traffic

If you are using a WiFi router to connect your Android mobile phone then there might be a possibility that the router is not letting the android phone connect to the internet. This is quite common and it occurs when someone accidentally uses the MAC address of your router. If that is the case users will have to go to their WiFi admin page and then make sure that they manually unblock the devices which are being blocked by the admin. Users will have to understand that every router manufacturer will have their admin settings so users have to manually go and check and alter any settings that block any android device to connect to the internet. All the routers have their user id and password printed on the box which will be required to login to the admin page. 

4. Check if Mobile data is turned off or on

Mobile data is something that causes a lot of problems if it is not disconnected when it is connected to a WiFi or Mobile Hotspot. Make sure to disable mobile data before you connect to any WiFi network. Android mobile phones generally prioritize WiFi over mobile data and if the WiFi is not logged in then there might be an issue with the internet connection. If you are unable to connect to the Mobile Hotspot simply disconnect your WiFi and Mobile Internet and then connect the phone back to WiFi. This might help get the internet connection back.

5. System Cache cleaning

Cache cleaning in an Android mobile phone might come in handy when the mobile is unable to connect to a proper internet connection. A lot of cache files generally get stored in the android operating systems. The files are somewhat important but very often they are the reason for creating problems in WiFi connectivity. Users will have to follow the steps below to clear the system cache on the phone.

• Reboot the android mobile phone and set it in recovery mode. The recovery mode is different for different mobile phones so users need to refer to the phone manual to know more. 

• Once users are able to access the recovery mode all they need to do is simply Wipe cache partition. Once the cache partition is wiped off it’s done.

6. Reset Wifi

Forgetting WiFi networks times could easily solve this problem at times. Generally, the WiFi password is saved to the android mobile phone. Users will have to remove the WiFi network and password and to do that users will have to go to Android Settings on their mobile phone. Then look for the WiFi option and simply select on the WiFi which is having issues connecting and click on ‘Forget’

7. Reset DNS server

If users are unable to connect to the internet with help of your IP address then the main issue users are facing is with the DNS server. This issue can be solved very easily and the only thing that users need to do is simply switch to the popular Google DNS which is (8.8.8.8;8.8.4.4). Changing it to the Google DNS will surely fix the issue. If users are looking to change the DNS server they will have to look for the ‘Modify Network’ option on their mobile phone. Then users will have to choose Static IP and then they will have the option of choosing the DNS server on their own.

8. APN Settings 

If users are using a host device for their Mobile Hotspot APN also known as Access Point Name plays a very important role. APN settings are generally altered by the provider so if there has been any recent change it is required to be updated or else the internet will not be working. Users can check their APN settings by following the steps given below:

• Users will have to go to the settings option and look for WiFi & network and then go to SIM & network and click on the SIM they are using for the Internet and look for Access Point Names.
• Users will now be able to look at the APN which is now connected to the phone. If the APN is not correct users can simply tap on the (+) APN option and add the latest Access Point Name.

This is going to solve any problem faced by users who are facing problems related to the mobile hotspot.

9. Reset Android Network Settings

If all the steps which are given above are not working for you then this might be the step that does. This step is a bit complicated so users need to follow the steps carefully.

• The first thing that users need to do is go to the settings app and simply go to the ‘Reset options’ on their android mobile phones.

• Users will now click on the ‘Reset Wi-Fi, mobile & Bluetooth’ option

• Simply click on the Reset Settings button which is available at the bottom of the screen.

• After the reset process is complete users will have to connect to the WiFi network and they will be good to go.

10. Factory Reset

This is something that is not recommended by anyone because if users end up factory resetting their phone they will end up losing all their data. To do a factory reset, users will have to go to settings and click on ‘Reset options and tap on ‘Factory data reset’’. This data reset will delete anything that is saved in the mobile phone including images, videos, contacts, and apps.

Conclusion

If you are connected to the hotspot without any internet then it is absolutely of no use. You can simply fix the issue with help of all the steps given below and you will be able to enjoy the internet from a WiFi network. Make sure to follow the steps mentioned to get the best results.

FAQs

1. Is the Mobile Hotspot Connected but No internet on Android a big issue?

No, if users follow the steps given above carefully they will be able to fix this issue without having to go to any service center.

2. Can this issue be solved by simply restarting the phone?

Yes, restarting the phone can surely work for you but it will not be the solution for everyone facing this issue.

3. Is Factory Reset of the phone necessary?

No, a factory reset of the phone is not necessary because the other ways will surely help solve the mobile hotspot error.

The post How to Fix Mobile Hotspot Connected but No Internet on Android (Easy Android Fixes) appeared first on VOIVO InfoTech.

Because if this, a lot of users often ask how can they completely remove uTorrent from their device. Sometimes, they face trouble trying to uninstall the program. It appears that uTorrent tries to prevent people from uninstalling it and sometimes people can’t even locate uTorrent in the list of programs from the control panel. In this post we have discussed why is uninstalling uTorrent necessary and how can people uninstalled it, if they face any issue. 

Why does the problem of insufficient access to uninstall torrents arise? 

Since Windows vista has been released, Microsoft has introduced an additional feature to make the operating system more secure and safe. The new security feature added to the system is called UAC, meaning User Account Control. This feature is designed to prevent dangerous actions to be executed by third parties like a virus, malware, or any other non-authorized user. 

Because of this new feature users can’t take actions like installing any software or uninstalling them, deleting files, etc. This feature provides limited accessibility to the already installed files and programs present in your system. User Account Control is no doubt an excellent thought and a great security feature but what’s annoying and frustrating is that it blocks installation of other applications or uninstallation even for the administrator. 

So, if your system too has the UAC protocol implemented, you would definitely face the “ you do not have sufficiently access to uninstall” issue, every time you try to uninstall or install a new program in your device. The only way to uninstall uTorrent is by disabling the UAC protocol in your device. To know the steps in detail continue to read below. 

How To Fix ‘You Do Not Have Sufficient Access To Uninstall uTorrent’

The problem with uninstalling uTorrent has become widespread. With time, their complaints started to arise and it has been found that it’s because of the UAC protocol. Every time you try to uninstall uTorrent or any other program from your device, you would receive an error message reading” you do not have sufficient access to uninstall uTorrent”. To help people out, we have enlisted the steps following which you can uninstall the program without any hassle. 

There are different ways in which you can solve the issue. Let’s go through each of them in details. 

Method 1 

Turn off the UAC 

The first and least complicated way is to turn off the UAC protocol. By now you must be knowing that this issue occurs due to the implementation of the UAC protocol. So, if you are to fix the error, you have to follow the following steps. 

• Press Windows key + S to open the windows search. 
• On the search menu, type in Change User Account Control settings. Click on the first result that appears on-screen. 
• Now, set the slider to ‘Never Notify’.

That’s all. You have successfully deactivated the UAC protocol and you wouldn’t face any further issues while you try to uninstall uTorrent or any other program. However, you are advised to restart your device and try to uninstall uTorrent. 

Method 2 

Run  Uninstaller In Administrator Mode

If you have already followed the first procedure, you don’t have to follow the below mentioned ones. But, if you aren’t willing to deactivate the UAC protocol, you can choose to follow this procedure. There are people who run the uninstaller as an administrator and have got successful l results. For doing that, 

• Visit the program folder 
• Now, visit uninstaller.exe 
• Once found, right-click on the uninstall executable
• Now visit, “run as administrator”
• This would uninstall the selected program. 

Method 3 

Update & Uninstall uTorrent On Windows 10

If you aren’t willing to perform any of the above two methods, you can opt for the their method. In this method, you have to update the uTorrent program to its latest version. Once it’s updated, uninstall it. If you already have the updated version installed, try installing the beta version of the program then. Now try to uninstall it. Lots of users have opted for this method and have been able to uninstall uTorrent successfully. 

People can also try some third-party app uninstallers to remove unwanted and stubborn programs like uTorrent from their device. Though disabling UAC protocol is expected to solve the issue, sometimes the issue might still persist. In such cases, you have to take the help of any third-party uninstaller program available on the internet. 

So, these are some of the effective ways to fix the issue of insufficient access. We have given a detailed list of the methods, along with the reason causing it for a proper understanding of our readers. If you have any further doubts, research or ask people in the comment section below. 

FAQs 

1. What will happen to my torrent files if I uninstall uTorrent?

When you uninstall you torrent, you can still access the downloaded files. However, you still have to restart it. If they are simply magnet links, they would get deleted. 

2. Why is it important to uninstall programs?

Uninstalling unnecessary programs is important because these programs occupy your device’s space. Thus by removing them from your device, you can enhance your device’s speed and functioning. 

The post How To Fix ‘You Do Not Have Sufficient Access To Uninstall uTorrent’ appeared first on VOIVO InfoTech.

Since IDM is a paid software, it requires a serial number to access the service after the 30-day trial period. But sometimes the IDM serial number won’t work and shows the error message “IDM has been registered with the fake serial number.” This is an annoying error that stops users from using the software. 

Now the question is, how to get rid of this error? Luckily, there are a few ways you can fix this issue. If you are curious to learn how read the below post.

Easy Ways To Remove The Error

No one wants to deal with the “IDM has been registered with a fake serial number” because it is irritating and ruins the overall user experience. However, if you are currently stuck with this error, you must find the right solution to fix it. This section will cover the solutions you can try to remove this error. All you need to do is follow the instructions as given and you will be good to go.

Method 1: Tweak The IDM Files

Sometimes you don’t have to do much, but only tweak the IDM files. If you are not sure what to do, follow the steps below.

• Access Windows Explorer on your device.
• Go to the Internet Download Manager folder and open it. You will see a long list of files there.

• Look for the “IDMGrHIp.exe.” file and delete it.
• Now copy and paste “idmBroker.exe” in the same folder.
• After you are done with the above steps, change the name of the “idmBroker.exe” file to “IDMGrHIp.exe.”

• Now proceed to restart your PC, so your device can process the changes.

Method 2: Fix In IDM’s Installation File

If you choose this method, follow these steps:

• Start by closing the IDM completely. You can do this by right-clicking on the IDM icon and selecting the Exit button.

• Locate the folder containing the IDM installation file.
• Within the right window, you will see the “IDMGrHIp” or “IDMGrHIp.exe” files. Change the name of the file or delete it if you like.

• Once the above step is done, look for the “idmBroker” file and copy it.

• Change the name of the copied file and save the changes by selecting the Enter button.

• That’s all you need to do to remove the “IDM has been registered with the fake serial number” error.

Method 3: Change The Value In The Registry

• Launch the Start/Run dialog. Alternatively, you can press the Windows + R keys together.
• Type “Regedit” in the search box and hit the Enter or OK button.

• Once the Registry Editor window is open, navigate to HKEY_CURRENT_USER\Software\DownloadManager
• In the right window, locate the entry: File “CheckUpdtVm”
• Double-click on the file and modify the default value in the “Value data” box from “10” to “0”. 
• After making the changes, hit OK to apply the changes.

Method 4: Edit The Host File

To resolve the “IDM has been registered with a fake serial number,” error a widely used method involves editing the Windows host file. Before you start make sure that IDM is completely closed, and no processes are using it. Also, you should terminate IDM from the Task Manager.

Here are the steps you need to follow:

• Navigate to C:\Windows\System32\drivers\etc\hosts.
• Locate the host file right-click on it and open it with Notepad.

If you encounter issues opening the host file with Notepad, follow these additional steps:

• Right-click on the host’s file and choose the option Properties.
• Hit the Security button and select Users.
• Now click Edit, followed by Users again.
• Check the “Full control” box.
• This should allow you to open and access the host file with Notepad.

• In the Notepad file, paste the following code: 127.0.0.1 www.internetdownloadmanager.com.

• After that select File and then Save.
• Go to the Properties of the host file and mark it as read-only.

• That concludes the process, and you are all set.

Why Do You Need A Serial Key For IDM?

IDM is not free software, but it does offer a 30-day free trial period. Once the trial run is over, users are required to pay for the software to continue to use it. So, you need the serial key to register your version of IDM.

• A serial key gives you full access to all the cool features of IDM.
• Without a key, IDM may limit your download speed, but with a serial key, you can enjoy faster downloads.
• Using a proper serial key helps you avoid annoying error messages during installation or use.
• Some advanced features are only available when you enter a valid serial key.
• Having a serial key ensures that you can get the latest updates and support from IDM.
• A serial key ensures that you can use IDM for a longer period without any interruptions.

To avoid any issues, you should use a genuine serial key. It will be provided to you at the time of purchase. The retailer should send the serial key to your email address. When registering IDM, make sure to enter the correct serial key, otherwise it won’t work.

If the serial key doesn’t work, you should contact the retailer you got the software from. They will either give you another serial key or do something to fix the issue.

If you encounter the “IDM has been registered with the fake serial number” error, try the solutions given in this post and it should solve the problem.

Final Words

By following these steps, you should be able to fix the “IDM has been registered with the fake serial number” error. If you don’t succeed in the first attempt, give it another shot. If needed, use different methods to see which one works for you.

The post How to Fix “IDM Has Been Registered With a Fake Serial Number” Error (Step-by-Step Guide) appeared first on VOIVO InfoTech.

Despite the market being filled with numerous mobile brands, the iPhone reigns supreme, and no brainstorming is needed to figure out the reasons. The quality and security provided by iPhones are still significantly ahead, and none of the other phone brands have been able to match it. However, this doesn’t imply that your iPhone can’t run into problems, and you will never have to get it repaired.

Always keep in mind that any technical device, regardless of being an expensive or high-end brand, will face issues time and again. The concern should be whether it can be fixed by performing some steps yourself or if it needs professional care. Problems that need professional care or a mobile phone repair tool are better explained by themselves, while some common problems that may look bigger but can be fixed yourself. Here we are sharing some common iPhone problems and the ways to fix them:

Fast Battery Draining

Most of the iPhone users have a common complain of battery draining too quickly. Well, in most of the cases, this problem can be fixed without taking your phone to a phone repair shop. The first thing you must do is to close the apps that are running in the background and uninstall the apps that consume too much of your battery if you don’t need them regularly.

Keeping the screen brightness too high also contributes to the draining of the battery easily, so prefer dimming the screen to save battery from draining too quickly. Deactivating location for apps to track you all the time also saves battery from draining quickly.

Apps Keep on Crashing

Constant crashing of apps is one of the most frustrating things to experience, as it interrupts daily tasks and often professional activities. If it happens to you, then instead of rushing to the repair service, give it a try to fix the issue at home, as it might work. One of the common reasons apps crashes is when you update your iPhone because the app’s version might not be supported by the operating system.

You can try restarting the phone and updating the app’s version and in most of the cases, it works. If apps continue to crash even after restarting the phone, create storage in your phone by removing the apps you don’t usually use.

Camera Not Working

Unless you have broken the camera directly by dropping your phone, there is a high chance you can fix it on your own. If it is blurry and you are unable to take pictures, the best you can do is to clean the camera using a clean microfiber cloth. Also, when you don’t take proper care of your iPhone, the first thing that gets impacted is the camera.

Some physical tricks that also helps is avoid exposing the phone in the intense humid ambiance, as extreme heat can damage the quality of photos and videos you are taking. At times, when you don’t update the iPhone’s OS with the current version, the camera starts malfunctioning, so it is important that you always update the phone with the latest OS update.

Overheating

Another most common complaint among iPhone users is overheating, and it is something that you shouldn’t ignore, as it can cause permanent damage. Before taking your phone to the professional service or trying a phone repair kit, you can try fixing this issue at home and see if it works. Switch off the phone completely and keep it in a cool and dry place because this will allow the heat to dissipate.

Remove the phone case or covers as it comes in between the air and direct ventilation of the phone, causing stress on the battery and making it overwork. Make a habit of using accessories that promote cooling and help with heat dispersion. If doing these doesn’t help you, then you should seek the mobile repair tools shop.

Wi-Fi Not Connecting

Wi-Fi is like the soul of the phone, and without it, mobiles don’t serve anything. Not getting connected to the Wi-Fi or constant interruption can come in between important work, but the good news is that you can fix this issue on your own without needing a professional service or phone repair tool kit. You can first try restarting the phone and the router to clear any network issues and refresh the connection, as most of the time, it is not the iPhone but the router’s issues.

If you find router working just fine with other connected devices, you can try installing newest iOS software update to support the Wi-Fi connection. You can also try with forgetting the network and reconnecting it by putting the credentials afresh.

Apps not installing

This is perhaps one of the rare occurrences with the iPhone, but when it happens can lead to sheer frustration. If you are dealing with this, check if the software update you were doing succeeded or failed, because time and again, the iPhone needs new features and improvements. Not having enough storage space is another reason this problem can occur, so remove unused apps and files.

If you are installing the apps by getting connected with Wi-Fi, then check if the connection is stable, and to successfully install the apps, always choose mobile data. The last thing you can do is restart your phone before you install the app to avoid any possible glitches.

Frozen Screen

Frozen screen can occur because of software glitches, overheating, and low storage, and in many cases, this problem can easily be fixed. You can restart your iPhone and hold down the button until you see the Apple logo appears and this works in most of the cases. Installing the latest software helps, as it removes the older bugs that were possibly causing the issue.

Storage can also be one of the reasons, and you should always delete the apps and files you no longer use. Always make a habit of updating your iOS whenever there is a new version available.

If your problems are far and beyond the ones discussed here, then PHONEFIX is your ideal solution as they manufacture mobile phone repair tools and kits for effective solutions.

All these discussed common issues can easily be fixed on your own, and the only time you need to give your phone for professional care and repair is if any of the issues persist. Though it is advisable to troubleshoot the common issues on your own, do not try to get into hardware fixing, as it is not recommended. 

The post Common iPhone Problems and the Ways to Fix Them Yourself appeared first on VOIVO InfoTech.

However, before you try to get your hands on trying to fix this solution, you must first check your headphones. It may so happen that your headphones are acting out, and it is not a problem with Discord at all. If you have a spare headphone at home, try to connect that to your PC and see whether it is working fine on Discord. 

There are many ways with the help of which you can fix when your mic on Discord does not work. Once you have gon through each of them on the list, you can give them a go. Within these three techniques, you will surely be able to find a cure in no time. Remember, it is important to be patient and give each one a try. 

Methods for Solving the Problem: Discord Mic Not Working

There are many methods when it comes to solving your situation when the mic on Discord stops working. All of these methods are full proof, but you need to try all of them if the other fails. Here are the methods on brief:

• Update your voice settings on Discord.
• Update the audio driver itself. 
• Rerun Discord as an administrator after quitting Discord. 
• Log out of Discord
• Selecting the Appropriate Input Device

Method 1: Update your voice settings on Discord.

One way you can solve this glitch is by resetting the settings for voice on Discord. This is one of the most full-proof solutions out there with a stellar success rate. If this issue is happening basically on your Discord desktop app, this will solve your problem in no time at all. If this glitch has taken place, especially after you have replaced your old headset with a new one, this option is the best one out there. Here is how you can do this:

• On the home page of Discord, click on the “Settings” option.

• First click on “Voice & Video,” then press on “Reset Voice Settings.”

• Now press on “Okay.”

• Check if the audio on Discord is working or not by reconnecting your microphone and sending a voice message. 

Method 2: Update the audio driver itself. 

Your Microphone on discord may stop working because of a wrong, missing, or old audio file. This can easily be fixed by updating your audio driver. 

There are two main ways you can get the correct audio driver on your computer. You can do either automatically or manually.

When you want to update your driver manually, you will have to go to the manufacturer’s website. Once there, search for your audio card and find out which one is the most recent audio driver that has been published by the company. You have to very sure that you are selecting the driver that is compatible with the variant you are using on your windows system. 

When you want to get this done automatically, the process is simpler. You can opt for this option if you are not particularly tech-savvy or don’t have the time or patience to manually carry out the operation. You can get this done automatically by using Driver Easy. With the help of Driver Easy, you will be able to get your updated audio driver in no time. It not only recognizes your system but also finds the driver that is ideal for your audiobook card as well as your Variants on your windows system. The download and installation will happen automatically. Here are the steps to be followed:

• Download Driver Easy and install it on your device. 
• Open Driver Easy and choose the option “Scan Now.” This step will grant permission to Driver Easy, after which it will scan your device for faulty and outmoded drivers. 

• You will then see a flagged audio driver, and click on the “Update” button next to it. This will help. You can automatically download and install the correct driver in place of the faulty one. 

To make it even easier, you can choose on the “Update All” option that will help you to download and install the correct version of each and every faulty driver that may exist on your device. While this requires a paid version of Driver Easy, the free version could perform the previous step. If you do not want to pay extra, you will simply have to make a few more steps. However, even with the free version, you will be able to mitigate your problem just well. 

• Now, all you have to do is go to Discord and try to send an audio message and check whether it is working fine. 

Method 3: Rerun Discord as an administrator after quitting Discord. 

Discord uses a UDP to help. You communicate and share information with your friends. It may so happen that it does not have all the permissions and privileges required to transmit your audio or voice message across the internet to your friends. One way to deal with the solution is to run Discord As an administrator, which will provide it with the necessary privileges. Here are the steps you need to follow:

• Right-click on the icon that says “Discord” on your Windows Taskbar. If you find that this icon is hidden, click on “Show hidden icons” You will be able to find it. Right-click on it, and you will be able to press on “Quit Discord.” 

• Now, on your desktop, find the Discord Shortcut icon and right-click on it. You will now be able to press on the option “Run as Administrator.”

• You will now be prompted by User Account Control. Now you simply have to press on “Yes.”
• Now verify whether this has worked by sending a voice message on Discord. 

Method 4: Log out of Discord

If you want to solve this problem rather quickly, it would be best to log off your account and log in again. This generally does the trick and helps you Restore communication. However, this is not a permanent fix and can only help.you for the time being. The other methods on this list are more viable choices for a long term solution. However, for this quick fix, these steps are what you need to follow: 

• On the bottom left corner, you will find a User Setting icon, simply tap on that if you are using the Desktop version of Discord. 

• Press on the Log Out option to confirm your exit. 

• Now, simply scroll down and click on the “Log Out” option and then follow it up by clicking on the logout button to confirm your activities. You may have to keep doing this for some time. It may take a little time and pressing for the application to register this move. 
• Once you have logged out, now it’s time to log in again. Simply enter your credentials and log into the app like you normally do. 
• Check now if your friends can hear your voice messages. 

Method 5: Changing the Automatic Input Sensitivity

If you have accidentally disabled the Automatic Input Sensitivity on your desktop, it can have a problem recognizing your voice on the microphone. If you have made any changes to the voice settings before, you might have unticked this box, which is leading to this trouble. When you do this, the manual Sensitive bar on the settings generally sends the slider to your left, which essentially disables the microphone, which leads to all this problem. This is how you can fix this problem:

• On your Discord window, you will be able to find a User Setting icon on the bottom left corner, and then click on it. 

• Under the App Settings option, you will be able to find “Voice and Video.” Click on it. 

• Now simply scroll down, and you will be able to find “Input Sensitivity” as an option. You will simply have to toggle on the option that says, “Automatically Determine input sensitivity.” Noe talks on your headphone and observes if the bar below the lights is a green color. If you see that the light is solid green, you can move on to the next step. 

• Now disable the toggle and see if the Manuka slider is in a position that is somewhere in the middle of the bar. Observe if the manual bar is pulsating when you are talking on the headphone. If this is happening, then your problem is solved. 

Method 6: Selecting the Appropriate Input Device

If none of those mentioned above methods have yet been fruitful, you need to see if the device is using the proper microphone at all in order to establish communication. When it comes to input devices, Discord may make some wrong choices. When you keep the settings here, Default usually chooses rather weird choices that are not truly applicable. This generally happens more with gaming computers or laptops that already have a built-in microphone. The problem is when you keep this setting as Default, and Discord is more likely to choose the internal microphone as the input device than the one on your headset. The built-in microphone generally does not have the necessary drivers, hence it cannot help your cause. This is how you can get this done:

• On the Discord window, go to the bottom left corner and choose on the “User Setting” option. 
• Under the App Settings section, you must click on the “Voice and Video” option. 
• Under Input Device, you will be able to find a drop-down menu where you will get an option to choose a microphone from your headset. 

• Now, you just need to make sure that the Input volume slider is on a maximum. 

Method 7: Disable the Exclusive Windows Mode

When using a Windows system, some applications can exclusively take control of the audio device driver. When you allow them to do so, it may pose a problem for Discord. If such exclusive functions are allowed, when you use some headphones, the microphone when using Discord may turn off or quiet down completely. This is how you can disable this function:

• On the bottom right corner, you will find a sound/volume option. Click on it. Following that, click on “Recording Devices.” 

• Now click on the microphone on your headset and select “Properties.” 

• Now you will find an advanced tab. Here deselect all the options that come under the Exclusive mode. You must then click on Apply in order to confirm the change in settings. 

• Now, you will simply have to reboot your system. 
• Go to discord and find if your microphone is working now. 

Some options work for some individuals, while others may have to go for the other solutions. There is no way of telling which solution will work for you. You will have to figure out what is wrong with your device and then work your way forward. Once you are able to troubleshoot, you will be able to use your microphone on Discord without any problem. Do not feel disheartened if one solution does not work out for you. Once you try out all the solutions, one of them is sure to work. 

Related post:

• https://vshare.eu/pair error fix
• How to Fix Windows Modules Installer Worker High CPU Usage!

The post 7 Ways to Fix Discord Mic Problems – Quick and Easy Guide for 2025 appeared first on VOIVO InfoTech.

Windows error codes can be really annoying as they hinder your workflow and waste your time. Some errors can stop you from working on your computer completely. One such issue is the error code 0x0 0x0.

If your computer is showing this error, it means there’s something wrong with your system. But like all other Windows errors, this one is fixable too. All you need to do is apply the right approach.

In this post, we will provide you with a detailed guide to fix the error 0x0 0x0 issue. Along with that, we will also discuss the causes of the error. So without wasting any time, let’s get into the details.

What is the 0x0 0x0 error code?

The 0x0 0x0 error occurs when you try to join the Windows Insider program. However, this error code can appear in other places as well.

You can also encounter this error when Microsoft crashes. It will keep appearing as pops up a notification on your screen unless it is fixed.

The biggest problem with this type of error is that it happens without warning. The error message can show up on the screen anytime when you run Microsoft and it will keep occurring again and again if not corrected properly.

Causes of Error 0x0 0x0

Before moving on to the solution part, you must have an idea about the reasons that lead to this issue.

This error message primarily occurs when your system starts malfunctioning within Windows. Apart from that, it can also occur because of incorrect system settings. Another possible reason could be a wrong entry made in your Windows registry file. 

The 0x0 error can also occur when you install or uninstall software incorrectly. Sometimes you get this error message when you shut you’re your PC incorrectly. For instance, when there’s a power cut and your system gets shut down suddenly.

Another big reason that can trigger this issue is when your computer is under a virus or malware attack. If this is the case, you shouldn’t take the situation lightly. Last but not the least, you can encounter this error message when you try to join the Windows Insider program. This happens because the service is disabled from the “Services” section in the Task Manager. 

To sum it up, various possible reasons can result in the Windows 0x0 error. Before you apply any solution method, you must find out the reason that’s causing it. This will help you choose the right approach to fix the issue.

Repair Methods

In the guide below, you will find a host of solutions that can help you fix the 0x0 0x0 error. You must follow all the steps meticulously to get the desired results.

Method 1: Enable Windows Insider Service 

If you realize that the 0x0 error is showing because of the Windows Insider Service being disabled, then you should apply this fix. It is an effective method that should solve the issue permanently. But if you ignore the issue, it will only make things worse.

To fix this error, you need to enable the Windows Insider Service from the Task Manager. For this, you need to follow these steps:

1. Press “Ctrl,” “Shift,” and “Esc” keys together to launch the Task Manager. Alternatively, you can also open the Task Manager from the Windows Search bar.
2. Go to the “Services” tab at the top of the Task Manager. You will be shown different options, but you need to select “Open Services”. You can spot this option near the bottom of the screen.
3. You will be taken to a new window called “Services.” Scroll down to the option Windows Insider Service near the bottom and double-click on it to move to the next step. 
4. This will open another small-scale window, where you need to access the “General” settings of the Windows Insider Service. 
5. Now click on the menu which is located beside the setting “Startup type.” If the option is set to “Disabled” then you know the 0x0 issue is occurring because of it.
6. Choose either “Automatic” or “Manual” as the startup option. Opting for both of them will fix the issue. You should opt for the “Manual” option so the service only opens when you want it to. Once you are done click “OK” to finalize the process. 
7. Now go to the Windows Insider Program and check if the issue is still there. If the error is still there, you should try the other methods mentioned in this guide.

Method 2: Close Conflicting Programs

The error 0x0 code also occurs when programs conflict with each other. The best way to solve this issue is by closing the conflicting programs.

Here is what you need to do:

1. At first, launch Task Manager by pressing the Ctrl-Alt-Del keys at the same time. By doing so, you will know the programs that are currently running.
2. Access the Processes tab and start closing the programs one by one. You can do this by highlighting each program and then clicking on the End Process option.
3. While closing the programs, keep a check if the error code is showing each time you close a process.
4. Once you know which program is causing the error, you can move to the next troubleshooting step, which includes reinstalling the software.

Method 3: Run Disk Cleanup

The runtime error 0x0 can also occur if you have low storage space on your computer. In this case, freeing up some storage can solve the issue. But before you proceed with this step, you should consider backing up your data. You can also clear the system cache and restart your computer.

• To run disk cleanup, launch the explorer window and right-click the main directory.
• Next, click Properties and select the Disk Cleanup option to initiate the process.

Method 4: Try Optimizing Feedback and Diagnostics Settings

The Windows Insider program, as well as the Windows OS, depends largely on the user’s feedback. The “Privacy” section in your Windows settings includes the “Diagnostics and feedback” area. This particular area is directly related to the Insider program, causing the 0x0 error. To fix this issue, you need to go to this section and toggle the relevant settings.

Here are the steps you need to follow:

1. The first thing you need to do is open the “Settings” of your device. You can locate this application either in the Windows Start Menu or in your Taskbar. 
2. On the Settings page, select the “Privacy” area and proceed ahead. 
3. Find the option “Diagnostics and feedback” and click on it.
4. Go to the “Diagnostic data” section and select “Optional diagnostic data.” 
5. Now turn on the toggle that is below the “Improve inking and typing” section. Repeat the same thing with the “Tailored experiences” area as well.

Well, that’s all you need to do to repair the 0x0 error. Make sure that you follow all the steps correctly to get the desired results.

Method 5: Apply The Registry Solution

In case, the above-mentioned methods fail to work, you can try the registry solution. Just so you know the Registry Editor makes an important part of the Windows 10 OS. It allows users with administrator privileges to access and modify the different registry files of the system. This program is needed to delete corrupted files and replace the missing ones.

To fix this issue, we are going to take a good look at the “WindowsSelfHost” registry. This is the specific registry that causes the 0x error. 

Follow these instructions to get started:

1. To start, you need to first launch the Windows Registry application. For this, you need to open the “Run” prompt and type “regedit” in it. Alternatively, you can also access the app through the Windows Start Menu. It is recommended to open the app as an administrator so that you don’t have to face any difficulties.
2. Check out the left column and you will see a whole list of registry entries there. You must follow a specific sequence to find the registry you want.
3. At first, click on the arrow sign beside “HKEY_LOCAL_MACHINE” and then choose “SOFTWARE.”
4. Now select “Microsoft” and scroll down to locate the “WindowsSelfHost” registry. 
5. You are required to remove this registry. Before proceeding to the next step, export the registry to your File Explorer. Right-click on the relevant area and tap the “Export” option. 
6. Once done, click on the “Save” option to finalize. 
7. Next, right-click on the relevant area and then hit the “Delete” option to get it over with.
8. This will delete the “WindowsSelfHostKey” registry.
9. After you are done with the above steps, restart your PC to let the system process everything. 

After restarting your PC check if the problem is solved. This is a very effective method and works almost every time. 

Method 6: Run the SFC Tool 

One of the many reasons behind the 0x0 error is corrupted or missing registry files in the system. The best solution to this is to run the SFC tool. It scours your Windows OS to look for anything that is not supposed to be there. In other words, it helps in detecting anomalies and fixes them to solve the issue. That being said, now let’s take a look at the steps.

1. At first, open the Command Prompt by using the Windows Start menu. Alternatively, you can also press the “Windows” and “X” keys to launch the Command Prompt. 
2. Next enter “sfc /scannow” in the command line. This will start the verification process. It can take several minutes, so you need to be a bit patient.
3. Now the SFC command will automatically detect the issues within the system and fix them for you. 
4. Once you are done with the above steps, open the Windows Insider program and check whether the issue is solved. There’s a good chance that your problem is taken care of.

Method 7: Reinstall The Graphics Driver

The error 0x0 can also be caused due to a bad graphics driver. In that case, you will need to reinstall the graphics driver.

Here is what you need to do:

1. First, open the Device Manager and locate the graphics driver that is creating the problem.
2. Now right-click the video card driver and hit the uninstall option.
3. After that restart your computer and reinstall the graphics driver.

Method 8: IE Related Runtime Error

If the error is occurring because of Internet Explorer, then you will need to follow these steps.

• Reset your browser:

For Windows 7, click Start and then go to Control Panel. Now click on the Internet Options and select the “Advanced tab.” Find the Reset button and click on it.

For Windows 8 and 10, click search and enter Internet Options. Next access the “Advanced tab” and click on the Reset option.

• Disable script debugging and error notifications:

On the Internet Options window, access the “Advanced tab” and search for the option Disable script debugging.

Enable the radio button. 

At the same time, uncheck the option “Display a Notification about every Script Error.” After that click on Apply and then OK. 

Once that is done, reboot your PC.

If these fixes don’t work, you can take a backup of your data and files and run repair reinstall on your PC. 

Final Words

The 0x0 0x0 error is a very common issue faced by Windows users. It not only disrupts your workflow but also stops you from working on your computer. But the good news is it is very much fixable. You can follow the solutions mentioned in this guide to fix the problem permanently. If you don’t have the confidence to do it yourself, you can go to someone who has good technical knowledge.

The post Fixing Error 0x0 0x0 on Windows: Step-by-Step Guide to Resolve the Issue appeared first on VOIVO InfoTech.

In many cases, it traces back to a corrupt .pst file. But before attempting heavy-handed fixes, let’s look at root causes — and how to layer in email security so you don’t inadvertently expose sensitive data during repair.

(…retain your “Consequences of Outlook Search Failure” and “What to Do” sections — with email security tips inserted at relevant steps.)

For example, before you run a pst repair tool (ScanPST or third-party), encrypt or secure your backup copy so no one can access private messages. Avoid running untrusted repair utilities. And never store .pst files on shared network drives — Microsoft doesn’t support it and it increases corruption risk.

Consequences of Outlook Search Failure:

In this part of the section, we will explore some consequences of this error. Some of them are listed below:

• Outlook freeze: When the crucial search functionality stops working owing to a corrupt .pst file, the application witnesses’ frequent crashes. 
• Loss of productive hours: The user will take more time in manually searching crucial and sensitive emails, contacts and events, leading to substantial loss of productive hours. 
• “The file cannot be opened” error: Outlook search failure owing to corruption issues results in certain error messages like “The file cannot be opened.”
• Missing crucial email messages: The user may miss vital and sensitive email messages or folders. 
• Outlook running slowly: The normal functioning of the email client witnesses slow operating speed, hampering operational efficiency. 
• Incomplete or no search results: Owing to corruption, the search function give incomplete or no results. 

What to Do When Outlook Search Fails Due to a Corrupt PST File?

In this part of the post, we will unearth some proven methods to fix this issue. The step-by-step guide is mentioned below:

Fix 1: Search Index Rebuilding: When the search function in Outlook doesn’t work efficiently, it may be because of incomplete or pending indexing status. We can rebuild search index to improve search results. There are following two ways to perform this action.

A- By Repairing MS Office: Follow the below steps:

• Browse Control Panel.
• Explore Programs>Programs and Features.
• Press Outlook 2016 or Microsoft Office.
• Then click the “Change” button.

• Select ‘Repair’ from option. Press ‘Continue’ to repair MS Office or Outlook 2016 installation.

B- Utilizing Outlook Index Repair Feature: The step-by-step guide is listed below: 

• Browse Outlook 2016 app.
• Navigate to File > Options > Search.
• Press ‘Indexing Options…’ tab.

• Press ‘Microsoft Outlook.’ 
• After this click the ‘Advanced’ button.

• Click ‘Rebuild’ and then press ‘OK’.

• Click ‘OK’ to proceed with Index rebuilding process.

• Wait for the completion of the process.

Fix 2: Create a New Outlook Profile: 

If the search tool is not providing the desired results, we can try fixing this issue by creating a new Outlook profile. The step-by-step guide is listed below:

• Brose Control Panel.
• Navigate to the ‘Mail’ option.

• Hit on the ‘Profile’ section.
• After this click ‘Show Profiles.’
• Then click Add. Name the newly-created Outlook profile.
• Click ‘Finish.’

• Set the newly-created profile as a default one.
• After performing the above step, again explore the Mail window in the Control Panel.
• Check ‘Always use this profile’ option.

• Open the new profile.
• Click the ‘OK’ tab.
• Restart the Outlook application.
• Find out if the issue is fixed or not.

Fix 3: PST File Repair Using ScanPST.exe: 

If corruption in the .pst file is disturbing search functionality then we must try fixing issues in the data file using built-in Inbox Repair Tool (ScanPST). Follow the below steps:

• Exit Outlook. Close all running applications as well as processes. 
• Wait for some time.
• After this press Windows + R keys to explore the ‘Run’ dialogue box.
• Type %programfiles%/Microsoft Office/ in the box. Click the Enter key. 
• Hover the cursor on the .pst file.

• Initiate the scan process.
• A report will be displayed. Evaluate the findings in the report.
• Select the ‘Repair’ tab to proceed. 

• Select backup creation check box. Provide the path of the folder where you need to save the backup file.

.

• Examine if the error has been resolved.

There is a possibility that ScanPST may fail to repair a damaged .pst file. The possibility of failure is higher in cases of large data files (more than 2 GB). ScanPST is the best for fixing minor corruption issues in small files. But in complex scenarios (like a virus attack), it struggles to fix issues. Such a scenario not only creates hurdles in normal Outlook functioning but also put the valuable data at risk. Such a situation demands an advanced tool. Stellar Repair for Outlook is a reliable software, that is recommended by IT experts. This tool has more features than the ScanPST. It is a user-friendly, data safe pst repair tool that can fix even large .pst files marred with complex corruption. This tool can address corruption issues in encrypted, or inaccessible .pst files.

Conclusion

Many users frequent ‘Outlook search not working’ issue. Our above guide titled outlook search fails leads to corrupt pst file provides a detailed preview of the problems and solutions of this issue. If a damaged .pst file is responsible for this issue, then we can fix it using built-in Inbox Repair Tool (ScanPST.Exe). In case the corruption level falls under severe level, then we need to rely on some advanced tool like Stellar Repair for Outlook. This is a data safe PST repair tool. It is not only applauded for its user-friendliness and quick repair speed, but also for its ability to fix even oversized, encrypted, and inaccessible .pst files. 

The post How to Fix Outlook Search Fails leads to PST Corruption appeared first on VOIVO InfoTech.

But there are often when you witness the message “You can’t view or download this file”. This happens when you don’t have enough space in your Gmail cloud storage. This download limit on Google normally stays for around 24 hours following which you might be able to access them again.

The Google Drive sharing limit is something that the officials don’t disclose but there are ways to bypass the Google Drive download limit without any hassle. Generally, the error messages come up in two options – “Google Drive quota exceeded” or “You can’t view or download this file.”

But, while you might have witnessed such issues a lot, not many people know how to overcome this shortcoming. Well, don’t worry, we have got your back and we are going to walk you through some of the simple steps.

What entails the Google Drive download limit?

Before anything, you need to realise the fact that Google Drive doesn’t allow the users unlimited data transfer. This is one of those facts that many of the users aren’t even aware of. So, whenever an individual shares a drive link with a file of big size, there are chances that Google will restrict the download, for obvious reasons.

When Google detects an unnecessary and unusual amount of data transfer beyond the permissible bandwidth, there are chances that there will be a download limit. So, coming round to such situations, you need to wait out the restriction for 24 hours or so.

But, even after 24 hours, open the link from a separate account to avoid getting struck by Google again. It might end up causing a permanent restriction on your account. If you are wondering why it happens, it is likely because Google wants to protect the privacy of the users. 

Steps to bypass Google download limit

Now, we know and understand that this is a serious piracy protection issue imposed by Google. But there are ways that you can use to overcome this hassle. The process isn’t complicated. You just need to follow the steps we have mentioned below:

• Once you open the link, sign in to your Google Drive account 
• In the file URL, replace the “UC” with “Open”
• Once done, reload the page again and bypass the imposed limit
• From there, select the “Add to My Drive” option and confirm it again
• In a new tab, open your Google Drive account, and then right-click on the added file
• From the drop-down menu, select “Make a copy”
• Once done, you can then download the file to your computer

How can one fix the error exceeded on Google drive?

If you are the individual whose shared file link is coming up with the download limit issue, there are a few important things you can do to fix the issues altogether. If people are coming back and reporting to you that your shared file is creating chaos, here’s what you can do to prevent that issue.

• Open your Google Drive account and find the file that you have shared
• From there, you right-click on the file and then select “Make a copy” to copy the file as a separate file in your drive. This will duplicate your file again
• From there, you can find the duplicate file and rename it as something completely different
• Once done, you can create a shareable link and share the same with the followers

This should likely solve all the problems that you are facing with the file. But, remember that you can’t do it every time because it puts your account at risk of getting banned for good. So, if you have to wait, do that.

What are the other ways to bypass the hassle?

If the above step isn’t working for you, there are a few other ways that you can use to bypass the restriction to be able to access the files or download them via the shareable Drive link.

1. By sharing the file as Public

The first option is to share the file as public. This imposes a risk of the file getting corrupted or viewed by other people on the internet but those risks are extremely minimal. The steps are simple for this, all you have to do is follow the steps we have mentioned down below:

• Open Google drive and navigate down to the file that you likely want to share
• Right-click on the file and choose the “Share” option from the menu
• From there, you can click on the “Advanced” option from the secondary menu dropdown
• Once it opens, you can find a section of “Who has access” where you can change the Private settings to “On-public on the web”
• Once that is completed, you can click on “Done” and you should be able to share the file seamlessly from there

2. By changing the ownership of the file

Another way you can bypass the Google Drive limit is by changing the ownership of the file. But, make sure that you do this for the general documents and not for the extremely important or confidential documents. Follow the steps as mentioned:

• Start by opening the home screen of Google Drive
• Search for the file that you want to share
• Right-click on it and select the “Share” option from the drop-down menu
• From there, navigate down to Advanced settings
• Click on the drop-down arrow from there and change the ownership of the file to someone else and then save the settings likewise

If you are experiencing issues concerning exceeding the download quota on Google, you must follow the steps that we have mentioned around. But, be careful not to be too persistent in bypassing the limit. Instead, you need to sit back and wait out the restriction so you don’t get blacklisted or banned from using Drive or Gmail, for that matter. 

FAQs

1. What is the download limit on Google Drive?

If you have been witnessing error while downloading files or through links on Google Drive, you have likely reached the download limit. The platform allows you to download around 750GB of data per day and even upload files up to 5TB size per day.

2. Can one disable the download option on Google Drive?

Once you click on the file that you don’t want to be downloaded, you can right-click on the file, click on Share, and then navigate down to the Advanced option. From there, you can click the disable option for the downloads and then finalise the option by clicking Okay.

3. Is downloading files from Google drive safe?

Yes, despite you getting error options, it is safe for you to download files from Google drive, mainly because it is a feature of Google. Aside from that, in case you are experiencing errors while downloading files from Google, make sure that you take your time aside and wait out the restriction for a day instead of rushing into it and trying again and again, we’d suggest you wait it out for a day and then try again.

The post [Complete Guide] Bypass Google Drive Download Limit (Quota Exceeded Fix) appeared first on VOIVO InfoTech.

Everyone prefers to buy a Roku digital player device for an unattainable experience. Of course, it is important to have more than a smart TV because no one wants to compromise their chill time. Watching movies and series is the ultimate escape from your busy schedule. 

You can get access to streaming media content from Roku television. It is one of the leading devices that Roku has offered up until now. The craze for Roku television is growing day by day. Its online services and its media streaming have created a buzz all around the world. 

Roku has collaborated with multiple OTT platforms so that entertainment lovers can enjoy Compared to any other smart TV, Roku TVs are special and will always be the top choice. That is why you need to take care of Roku TV just as it boosts your mood every day.

How do I activate the Roku TV?

Want some quick guidance to activate your Roku TV? Well, here we are with the guidance. We will let you know every single step that will help you activate the Roku TV once and for all. After that, you can enjoy endless streaming with high picture and audio quality at home. You just need to follow the steps below to activate your Roku TV on your own.

• Hardware setup

The very first task you need to do is complete the hardware setup of the Roku TV by using the Quick Start Guide. Every Roku device comes with instructions that will let you prepare the on-screen setup and activate it.

• Set up an email address for your Roku device

You will be asked to enter an email address that will be added to your Roku account. This is a crucial step; be selective so that you can operate your Roku account whenever you turn on the TV. Be careful when you select the email address because it will be permanently attached to the Roku account.

• Verify account

After you successfully select an email address, you need to verify the account, so keep your laptop or mobile phone handy. You might have to access the email address to verify the account with an OTP. 

• Login

When everything is done—your Roku account ID is set up with the password—you will remain with a single task. The major responsibility that remains is logging in with the Roku account ID and password. Turn on the Internet connection and connect it to your Roku television so that you can activate the account.

• Setting

The very next step is to set up every feature of the Roku TV. You need to set up the audio level, the video, and every feature available in it. Then, you can watch every show on Roku TV comfortably, anytime.

• Manage channels

You need to subscribe to the channels, whichever you want, on your Roku devices. Roku will take care of the streaming channels you have installed or prefer. These all can be managed with the help of settings.

Always keep in mind that Roku never charges a single penny from the users to activate their account on Roku TV or to create one. So be aware of any fraud and do not pass information or charges to a third party. 

Perks of owning a Roku TV 

Once you keep learning about the advantages of having a Roku television, it may never end. This is one of the high-tech devices that can solve all your issues. Roku television is not just an ordinary smart TV, it is more than that. Let us understand the various features of Roku and why it is the best choice you have ever made:

• Advanced technology 

Roku TV has the perfect shape that can fit any room and your budget too. Your Roku TV can be magical; this television is the finest TV released now in the market. Roku TV is the perfect device for a smart home because it can work significantly with Apple Airplay, Google Home, Alexa, and Apple Home.

• Fast Streaming

There will be 1,000 channels on your TV. Don’t you ever get irritated or annoyed with the unwanted channels appearing in front of your eyes when you want to find the perfect show or match? Well, you need to say goodbye to all those days. Now Roku has found the perfect solution for fast streaming so that you can quickly find the right movies and shows across thousands of them. Pick up what you like or continue watching them anytime.

• Customize

Have you ever heard about television that will let you customize the screensaver or the photo streams? Well, Roku TV will. That is the reason Roku TV is considered one of the best. You can prefer genres, set a particular screensaver for your Roku television, and also stream the photos that you like the most.

• Save list

Roku television will let you save movies or even make a list out of them. So that you never miss out on your favorite shows or sports games, this is one of the best features, and the list updates automatically too.

• Multiple OTT platforms

You can add multiple channels and an OTT platform to your Roku television. You will never be stuck with one boring plan. You can easily change the plan accordingly and alter everything you want with the Roku television.

• Theatre-like experience

 Roku TV has to offer you a lot. You will get cinematic sound quality, and clear dialogue, and can also reach beyond the Roku television with the help of wireless Roku audio. To get theatre-like experiences Roku is the perfect television; it is all you need to boost the experience.

 What is the reason behind the Roku TV turning off frequently?

Is your Roku TV turning off again and again when you watch something on it? Well, do not ignore it. Understand that there can be many reasons behind this malfunction. Well, there is no need to worry because the reasons will be very minor and can be fixed by yourself. Before finding the solution, you need to find out the cause of why the Roku TV keeps turning off. Check out the pointers mentioned below, because of which your Roku TV may turn off frequently.

• Low power can be a cause of turning off the TV often.
• When the Roku television gets overheated, it may also turn off automatically for safety measures.
• Sometimes bugs in the system can be another reason to turn off the Roku television again and again.
• Do you remember if you have enabled the sleep timer? Well, the updated sleep timer can turn off the Roku TV.
• Roku TV has auto-power-saving modes, which will turn off the TV when it consumes too much power.
• More often, outdated software can be a reason for the Roku TV turning off frequently. The internal hardware issues can cause the same problem for your Roku TV.
• A loose power plug on the Roku television can also turn it off without any notification.

How do I fix Roku TV if it keeps turning off?

There are distinct solutions for every problem related to your Roku TV. You can get fine experts who can help you through, but before trying out major fixes, you can always take a chance with the general troubleshooting solutions. If your Roku TV keeps turning off again and again, there are many ways to fix it. At least a small trial can be initiated. 

• Restart

Restarting Roku TV can be an instant solution for systemic glitches. Your Roku TV may be going through some systematic glitches, which can be solved by rebooting the device. You can simply go to the settings and then the power option, where you will find the option called “System Restart.” Click on the Restart button, and your Roku TV will automatically reboot.

• Cool down the Roku TV

The best thing to do is to cool down the Roku TV. If it is turning off again and again, remember that Roku TV is an advanced device, designed in a way to conserve energy and also avoid major damage. If the Roku television is overused and heats up, you need to cool it down and check if you can turn it on again.

• Fix the voltage

What if the problem is at your home with the power supply system? You can fix the voltage at your home by checking the power supply. Figure out if the power supply is sufficient for the Roku TV to run without any hurdles.

• Turn off the Voice Assistant device

Sometimes the Voice Assistant devices can trigger the smooth functioning of the Roku television. So you need to take a chance and disconnect the audio assistant from your Roku television, then check if it can run smoothly.

 Conclusion

 There are so many instant solutions that you can figure out. Roku.inc has a particular support team that dedicatedly helps all users from all across the world. You can take a chance with customer service, or you can simply apply the suggestions mentioned above. This will ultimately help you to fix the issue of the Roku TV turning off instantly. There is no doubt that your Roku television will be your major concern, as it is the right source of entertainment.

The post Why Does My Roku TV Keep Turning Off — How to Fix It? appeared first on VOIVO InfoTech.

For example, the Roku TV sounds not working. This can happen due to various reasons. But the question is how to fix it.

If you are experiencing a similar issue, you have come to the right place. In this post, we will suggest some easy solutions that will help you to fix the problem. So without wasting time, let’s get to the details.

Easy Ways To Fix Roku TV Sound Not Working

Roku TV sound not working is a common issue. You are not the first or the last person to experience it. It is indeed an annoying feeling when your Roku TV sound stops working. Thankfully, some easy fixes will take care of the problem.

Method 1: Check if the “Mute” option is turned off

Before trying any other solution, you should check if the “mute” option of your Roku TV is turned off. If the mute mode is on, it will prevent the TV from playing any sound.

To check whether the mute mode is on, take your Roku TV remote and press the Mute button. This will deactivate the mute mode and the sound will start playing.

Also, don’t forget to check the volume levels. Make sure that the volume is set at a level that is audible to your ears. Press the Volume Up button on the remote and set the volume level somewhere around 50%.

These are some of the things you should check when your Roku TV stops playing sound. If this doesn’t solve the issue, move on to the next method.

Method 2: Try a different port

Sometimes the port you are using is to be blamed. If the port doesn’t work properly, it might cut out your TV sound. 

A port might malfunction because of various reasons. One of the main causes is dirt. The good thing is that Roku TV comes with multiple ports. So if one port is not working, you can try a different port.

Connect your Roku to another port and see if it’s working. If the problem occurred because of the port, connecting to a different port will fix the issue. If not, then you will have to try a different solution.

Method 3: Unplug and re-plug the cables

If your Roku TV is not playing any sound, you can try unplugging the cables and plugging them back in. This is another easy way to fix this issue.

For this method to work, you need to unplug all the cables connected to your Roku device. For instance, if your TV is connected to your Roku device via an HDMI wire, unplug the cable from both devices. Insert them back in and check if the problem is solved.

If the issue occurred due to a loose connection, this solution will fix it.

Method 4: Adjust your Roku’s sound settings

With a quick upwards tap on the remote, you can access the Settings section on your Roku device. There you will find all the audio settings.

Roku has an Auto setting that enables the device to automatically playback sound using the best method. To access this setting, you need to follow these steps.

• Go to Roku’s home screen, and locate the Settings section.
• Select the Audio option by pressing the OK button on your remote.
• Scroll down to view your current sound settings: digital output format, streaming audio format, and audio mode.
• To make a change, press the OK button on the remote. It will show you the available options.
• If the Auto setting is not working, you can select your preferred settings.
• If the no sound option is enabled, choose Menu Volume from the list of Audio settings. Now you can select between high, medium, or low for your volume.

Method 5: Update your Roku device

If you are running an outdated Roku update, it might create issues for the device. For example, your Roku device may stop playing sound. In this case, the only logical thing to do is update your Roku. To check if you are using the latest version of Roku, follow the instructions below.

• Go to Roku’s Settings on the home screen.
• Scroll down to access System. For this, you will have to press the OK button on your remote.
• Scroll down again and select System Update.
• Check the bottom of the screen to see if your Roku TV is updated.
• Hit the OK button on your remote to manually check for an update.
• Get the latest system update if you haven’t installed it yet.

Method 6: Check your internet connection

If you have a poor internet connection, it might affect the sound quality of your Roku device.

If none of the above methods works, it’s probably because your Wi-Fi is to be blamed. Check if the internet connection is working properly. If not, connect your device to a different network.

Method 7: Factory reset your Roku device

If your Roku TV is still not playing sound, you should try factory resetting the device. Before you decide to take this step, you should be informed that it will return the device to its default settings.

You will find the Factory Reset option in Roku’s advanced system settings section. While many won’t opt for this solution, it is capable of solving a variety of issues.

To factory reset your Roku, you should follow these steps:

• Go to Roku’s home screen and access Settings.
• Select System by pressing the OK button on your remote
• Go to Advanced System Settings.
• Select the Factory Reset option.
• Now you will be asked to enter the four-digit code provided by Roku.
• After that hit the OK button.

Final Words

We have explained all the common solutions for Roku TV sound not working. In some cases, you might have to try more than one method. Make sure to follow the steps correctly and the problem should be solved in no time.

The post How to Fix Roku TV Sound Not Working appeared first on VOIVO InfoTech.